1 files changed, 499 insertions, 0 deletions
diff --git a/src/android/app/src/main/jni/default_ini.h b/src/android/app/src/main/jni/default_ini.h
new file mode 100644
index 000000000..60db951c8
--- /dev/null
+++ b/src/android/app/src/main/jni/default_ini.h
@@ -0,0 +1,499 @@
+// SPDX-FileCopyrightText: 2023 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+namespace DefaultINI {
+
+const char* android_config_file = R"(
+
+[ControlsP0]
+# The input devices and parameters for each Switch native input
+# The config section determines the player number where the config will be applied on. For example "ControlsP0", "ControlsP1", ...
+# It should be in the format of "engine:[engine_name],[param1]:[value1],[param2]:[value2]..."
+# Escape characters $0 (for ':'), $1 (for ',') and $2 (for '$') can be used in values
+
+# Indicates if this player should be connected at boot
+connected=
+
+# for button input, the following devices are available:
+#  - "keyboard" (default) for keyboard input. Required parameters:
+#      - "code": the code of the key to bind
+#  - "sdl" for joystick input using SDL. Required parameters:
+#      - "guid": SDL identification GUID of the joystick
+#      - "port": the index of the joystick to bind
+#      - "button"(optional): the index of the button to bind
+#      - "hat"(optional): the index of the hat to bind as direction buttons
+#      - "axis"(optional): the index of the axis to bind
+#      - "direction"(only used for hat): the direction name of the hat to bind. Can be "up", "down", "left" or "right"
+#      - "threshold"(only used for axis): a float value in (-1.0, 1.0) which the button is
+#          triggered if the axis value crosses
+#      - "direction"(only used for axis): "+" means the button is triggered when the axis value
+#          is greater than the threshold; "-" means the button is triggered when the axis value
+#          is smaller than the threshold
+button_a=
+button_b=
+button_x=
+button_y=
+button_lstick=
+button_rstick=
+button_l=
+button_r=
+button_zl=
+button_zr=
+button_plus=
+button_minus=
+button_dleft=
+button_dup=
+button_dright=
+button_ddown=
+button_lstick_left=
+button_lstick_up=
+button_lstick_right=
+button_lstick_down=
+button_sl=
+button_sr=
+button_home=
+button_screenshot=
+
+# for analog input, the following devices are available:
+#  - "analog_from_button" (default) for emulating analog input from direction buttons. Required parameters:
+#      - "up", "down", "left", "right": sub-devices for each direction.
+#          Should be in the format as a button input devices using escape characters, for example, "engine$0keyboard$1code$00"
+#      - "modifier": sub-devices as a modifier.
+#      - "modifier_scale": a float number representing the applied modifier scale to the analog input.
+#          Must be in range of 0.0-1.0. Defaults to 0.5
+#  - "sdl" for joystick input using SDL. Required parameters:
+#      - "guid": SDL identification GUID of the joystick
+#      - "port": the index of the joystick to bind
+#      - "axis_x": the index of the axis to bind as x-axis (default to 0)
+#      - "axis_y": the index of the axis to bind as y-axis (default to 1)
+lstick=
+rstick=
+
+# for motion input, the following devices are available:
+#  - "keyboard" (default) for emulating random motion input from buttons. Required parameters:
+#      - "code": the code of the key to bind
+#  - "sdl" for motion input using SDL. Required parameters:
+#      - "guid": SDL identification GUID of the joystick
+#      - "port": the index of the joystick to bind
+#      - "motion": the index of the motion sensor to bind
+#  - "cemuhookudp" for motion input using Cemu Hook protocol. Required parameters:
+#      - "guid": the IP address of the cemu hook server encoded to a hex string. for example 192.168.0.1 = "c0a80001"
+#      - "port": the port of the cemu hook server
+#      - "pad": the index of the joystick
+#      - "motion": the index of the motion sensor of the joystick to bind
+motionleft=
+motionright=
+
+[ControlsGeneral]
+# To use the debug_pad, prepend `debug_pad_` before each button setting above.
+# i.e. debug_pad_button_a=
+
+# Enable debug pad inputs to the guest
+# 0 (default): Disabled, 1: Enabled
+debug_pad_enabled =
+
+# Whether to enable or disable vibration
+# 0: Disabled, 1 (default): Enabled
+vibration_enabled=
+
+# Whether to enable or disable accurate vibrations
+# 0 (default): Disabled, 1: Enabled
+enable_accurate_vibrations=
+
+# Enables controller motion inputs
+# 0: Disabled, 1 (default): Enabled
+motion_enabled =
+
+# Defines the udp device's touch screen coordinate system for cemuhookudp devices
+#  - "min_x", "min_y", "max_x", "max_y"
+touch_device=
+
+# for mapping buttons to touch inputs.
+#touch_from_button_map=1
+#touch_from_button_maps_0_name=default
+#touch_from_button_maps_0_count=2
+#touch_from_button_maps_0_bind_0=foo
+#touch_from_button_maps_0_bind_1=bar
+# etc.
+
+# List of Cemuhook UDP servers, delimited by ','.
+# Default: 127.0.0.1:26760
+# Example: 127.0.0.1:26760,123.4.5.67:26761
+udp_input_servers =
+
+# Enable controlling an axis via a mouse input.
+# 0 (default): Off, 1: On
+mouse_panning =
+
+# Set mouse sensitivity.
+# Default: 1.0
+mouse_panning_sensitivity =
+
+# Emulate an analog control stick from keyboard inputs.
+# 0 (default): Disabled, 1: Enabled
+emulate_analog_keyboard =
+
+# Enable mouse inputs to the guest
+# 0 (default): Disabled, 1: Enabled
+mouse_enabled =
+
+# Enable keyboard inputs to the guest
+# 0 (default): Disabled, 1: Enabled
+keyboard_enabled =
+
+[Core]
+# Whether to use multi-core for CPU emulation
+# 0: Disabled, 1 (default): Enabled
+use_multi_core =
+
+# Enable unsafe extended guest system memory layout (8GB DRAM)
+# 0 (default): Disabled, 1: Enabled
+use_unsafe_extended_memory_layout =
+
+[Cpu]
+# Adjusts various optimizations.
+# Auto-select mode enables choice unsafe optimizations.
+# Accurate enables only safe optimizations.
+# Unsafe allows any unsafe optimizations.
+# 0 (default): Auto-select, 1: Accurate, 2: Enable unsafe optimizations
+cpu_accuracy =
+
+# Allow disabling safe optimizations.
+# 0 (default): Disabled, 1: Enabled
+cpu_debug_mode =
+
+# Enable inline page tables optimization (faster guest memory access)
+# 0: Disabled, 1 (default): Enabled
+cpuopt_page_tables =
+
+# Enable block linking CPU optimization (reduce block dispatcher use during predictable jumps)
+# 0: Disabled, 1 (default): Enabled
+cpuopt_block_linking =
+
+# Enable return stack buffer CPU optimization (reduce block dispatcher use during predictable returns)
+# 0: Disabled, 1 (default): Enabled
+cpuopt_return_stack_buffer =
+
+# Enable fast dispatcher CPU optimization (use a two-tiered dispatcher architecture)
+# 0: Disabled, 1 (default): Enabled
+cpuopt_fast_dispatcher =
+
+# Enable context elimination CPU Optimization (reduce host memory use for guest context)
+# 0: Disabled, 1 (default): Enabled
+cpuopt_context_elimination =
+
+# Enable constant propagation CPU optimization (basic IR optimization)
+# 0: Disabled, 1 (default): Enabled
+cpuopt_const_prop =
+
+# Enable miscellaneous CPU optimizations (basic IR optimization)
+# 0: Disabled, 1 (default): Enabled
+cpuopt_misc_ir =
+
+# Enable reduction of memory misalignment checks (reduce memory fallbacks for misaligned access)
+# 0: Disabled, 1 (default): Enabled
+cpuopt_reduce_misalign_checks =
+
+# Enable Host MMU Emulation (faster guest memory access)
+# 0: Disabled, 1 (default): Enabled
+cpuopt_fastmem =
+
+# Enable Host MMU Emulation for exclusive memory instructions (faster guest memory access)
+# 0: Disabled, 1 (default): Enabled
+cpuopt_fastmem_exclusives =
+
+# Enable fallback on failure of fastmem of exclusive memory instructions (faster guest memory access)
+# 0: Disabled, 1 (default): Enabled
+cpuopt_recompile_exclusives =
+
+# Enable optimization to ignore invalid memory accesses (faster guest memory access)
+# 0: Disabled, 1 (default): Enabled
+cpuopt_ignore_memory_aborts =
+
+# Enable unfuse FMA (improve performance on CPUs without FMA)
+# Only enabled if cpu_accuracy is set to Unsafe. Automatically chosen with cpu_accuracy = Auto-select.
+# 0: Disabled, 1 (default): Enabled
+cpuopt_unsafe_unfuse_fma =
+
+# Enable faster FRSQRTE and FRECPE
+# Only enabled if cpu_accuracy is set to Unsafe.
+# 0: Disabled, 1 (default): Enabled
+cpuopt_unsafe_reduce_fp_error =
+
+# Enable faster ASIMD instructions (32 bits only)
+# Only enabled if cpu_accuracy is set to Unsafe. Automatically chosen with cpu_accuracy = Auto-select.
+# 0: Disabled, 1 (default): Enabled
+cpuopt_unsafe_ignore_standard_fpcr =
+
+# Enable inaccurate NaN handling
+# Only enabled if cpu_accuracy is set to Unsafe. Automatically chosen with cpu_accuracy = Auto-select.
+# 0: Disabled, 1 (default): Enabled
+cpuopt_unsafe_inaccurate_nan =
+
+# Disable address space checks (64 bits only)
+# Only enabled if cpu_accuracy is set to Unsafe. Automatically chosen with cpu_accuracy = Auto-select.
+# 0: Disabled, 1 (default): Enabled
+cpuopt_unsafe_fastmem_check =
+
+# Enable faster exclusive instructions
+# Only enabled if cpu_accuracy is set to Unsafe. Automatically chosen with cpu_accuracy = Auto-select.
+# 0: Disabled, 1 (default): Enabled
+cpuopt_unsafe_ignore_global_monitor =
+
+[Renderer]
+# Which backend API to use.
+# 0: OpenGL (unsupported), 1 (default): Vulkan, 2: Null
+backend =
+
+# Enable graphics API debugging mode.
+# 0 (default): Disabled, 1: Enabled
+debug =
+
+# Enable shader feedback.
+# 0 (default): Disabled, 1: Enabled
+renderer_shader_feedback =
+
+# Enable Nsight Aftermath crash dumps
+# 0 (default): Disabled, 1: Enabled
+nsight_aftermath =
+
+# Disable shader loop safety checks, executing the shader without loop logic changes
+# 0 (default): Disabled, 1: Enabled
+disable_shader_loop_safety_checks =
+
+# Which Vulkan physical device to use (defaults to 0)
+vulkan_device =
+
+# 0: 0.5x (360p/540p) [EXPERIMENTAL]
+# 1: 0.75x (540p/810p) [EXPERIMENTAL]
+# 2 (default): 1x (720p/1080p)
+# 3: 2x (1440p/2160p)
+# 4: 3x (2160p/3240p)
+# 5: 4x (2880p/4320p)
+# 6: 5x (3600p/5400p)
+# 7: 6x (4320p/6480p)
+resolution_setup =
+
+# Pixel filter to use when up- or down-sampling rendered frames.
+# 0: Nearest Neighbor
+# 1 (default): Bilinear
+# 2: Bicubic
+# 3: Gaussian
+# 4: ScaleForce
+# 5: AMD FidelityFX™️ Super Resolution [Vulkan Only]
+scaling_filter =
+
+# Anti-Aliasing (AA)
+# 0 (default): None, 1: FXAA
+anti_aliasing =
+
+# Whether to use fullscreen or borderless window mode
+# 0 (Windows default): Borderless window, 1 (All other default): Exclusive fullscreen
+fullscreen_mode =
+
+# Aspect ratio
+# 0: Default (16:9), 1: Force 4:3, 2: Force 21:9, 3: Stretch to Window
+aspect_ratio =
+
+# Anisotropic filtering
+# 0: Default, 1: 2x, 2: 4x, 3: 8x, 4: 16x
+max_anisotropy =
+
+# Whether to enable VSync or not.
+# OpenGL: Values other than 0 enable VSync
+# Vulkan: FIFO is selected if the requested mode is not supported by the driver.
+# FIFO (VSync) does not drop frames or exhibit tearing but is limited by the screen refresh rate.
+# FIFO Relaxed is similar to FIFO but allows tearing as it recovers from a slow down.
+# Mailbox can have lower latency than FIFO and does not tear but may drop frames.
+# Immediate (no synchronization) just presents whatever is available and can exhibit tearing.
+# 0: Immediate (Off), 1: Mailbox, 2 (Default): FIFO (On), 3: FIFO Relaxed
+use_vsync =
+
+# Selects the OpenGL shader backend. NV_gpu_program5 is required for GLASM. If NV_gpu_program5 is
+# not available and GLASM is selected, GLSL will be used.
+# 0: GLSL, 1 (default): GLASM, 2: SPIR-V
+shader_backend =
+
+# Whether to allow asynchronous shader building.
+# 0 (default): Off, 1: On
+use_asynchronous_shaders =
+
+# NVDEC emulation.
+# 0: Disabled, 1: CPU Decoding, 2 (default): GPU Decoding
+nvdec_emulation =
+
+# Accelerate ASTC texture decoding.
+# 0: Off, 1 (default): On
+accelerate_astc =
+
+# Turns on the speed limiter, which will limit the emulation speed to the desired speed limit value
+# 0: Off, 1: On (default)
+use_speed_limit =
+
+# Limits the speed of the game to run no faster than this value as a percentage of target speed
+# 1 - 9999: Speed limit as a percentage of target game speed. 100 (default)
+speed_limit =
+
+# Whether to use disk based shader cache
+# 0: Off, 1 (default): On
+use_disk_shader_cache =
+
+# Which gpu accuracy level to use
+# 0: Normal, 1 (default): High, 2: Extreme (Very slow)
+gpu_accuracy =
+
+# Whether to use asynchronous GPU emulation
+# 0 : Off (slow), 1 (default): On (fast)
+use_asynchronous_gpu_emulation =
+
+# Inform the guest that GPU operations completed more quickly than they did.
+# 0: Off, 1 (default): On
+use_fast_gpu_time =
+
+# Force unmodified buffers to be flushed, which can cost performance.
+# 0: Off (default), 1: On
+use_pessimistic_flushes =
+
+# Whether to use garbage collection or not for GPU caches.
+# 0 (default): Off, 1: On
+use_caches_gc =
+
+# The clear color for the renderer. What shows up on the sides of the bottom screen.
+# Must be in range of 0-255. Defaults to 0 for all.
+bg_red =
+bg_blue =
+bg_green =
+
+[Audio]
+# Which audio output engine to use.
+# auto (default): Auto-select
+# cubeb: Cubeb audio engine (if available)
+# sdl2: SDL2 audio engine (if available)
+# null: No audio output
+output_engine =
+
+# Which audio device to use.
+# auto (default): Auto-select
+output_device =
+
+# Output volume.
+# 100 (default): 100%, 0; mute
+volume =
+
+[Data Storage]
+# Whether to create a virtual SD card.
+# 1 (default): Yes, 0: No
+use_virtual_sd =
+
+# Whether or not to enable gamecard emulation
+# 1: Yes, 0 (default): No
+gamecard_inserted =
+
+# Whether or not the gamecard should be emulated as the current game
+# If 'gamecard_inserted' is 0 this setting is irrelevant
+# 1: Yes, 0 (default): No
+gamecard_current_game =
+
+# Path to an XCI file to use as the gamecard
+# If 'gamecard_inserted' is 0 this setting is irrelevant
+# If 'gamecard_current_game' is 1 this setting is irrelevant
+gamecard_path =
+
+[System]
+# Whether the system is docked
+# 1 (default): Yes, 0: No
+use_docked_mode =
+
+# Sets the seed for the RNG generator built into the switch
+# rng_seed will be ignored and randomly generated if rng_seed_enabled is false
+rng_seed_enabled =
+rng_seed =
+
+# Sets the current time (in seconds since 12:00 AM Jan 1, 1970) that will be used by the time service
+# This will auto-increment, with the time set being the time the game is started
+# This override will only occur if custom_rtc_enabled is true, otherwise the current time is used
+custom_rtc_enabled =
+custom_rtc =
+
+# Sets the systems language index
+# 0: Japanese, 1: English (default), 2: French, 3: German, 4: Italian, 5: Spanish, 6: Chinese,
+# 7: Korean, 8: Dutch, 9: Portuguese, 10: Russian, 11: Taiwanese, 12: British English, 13: Canadian French,
+# 14: Latin American Spanish, 15: Simplified Chinese, 16: Traditional Chinese, 17: Brazilian Portuguese
+language_index =
+
+# The system region that yuzu will use during emulation
+# -1: Auto-select (default), 0: Japan, 1: USA, 2: Europe, 3: Australia, 4: China, 5: Korea, 6: Taiwan
+region_index =
+
+# The system time zone that yuzu will use during emulation
+# 0: Auto-select (default), 1: Default (system archive value), Others: Index for specified time zone
+time_zone_index =
+
+# Sets the sound output mode.
+# 0: Mono, 1 (default): Stereo, 2: Surround
+sound_index =
+
+[Miscellaneous]
+# A filter which removes logs below a certain logging level.
+# Examples: *:Debug Kernel.SVC:Trace Service.*:Critical
+log_filter = *:Trace
+
+# Use developer keys
+# 0 (default): Disabled, 1: Enabled
+use_dev_keys =
+
+[Debugging]
+# Record frame time data, can be found in the log directory. Boolean value
+record_frame_times =
+# Determines whether or not yuzu will dump the ExeFS of all games it attempts to load while loading them
+dump_exefs=false
+# Determines whether or not yuzu will dump all NSOs it attempts to load while loading them
+dump_nso=false
+# Determines whether or not yuzu will save the filesystem access log.
+enable_fs_access_log=false
+# Enables verbose reporting services
+reporting_services =
+# Determines whether or not yuzu will report to the game that the emulated console is in Kiosk Mode
+# false: Retail/Normal Mode (default), true: Kiosk Mode
+quest_flag =
+# Determines whether debug asserts should be enabled, which will throw an exception on asserts.
+# false: Disabled (default), true: Enabled
+use_debug_asserts =
+# Determines whether unimplemented HLE service calls should be automatically stubbed.
+# false: Disabled (default), true: Enabled
+use_auto_stub =
+# Enables/Disables the macro JIT compiler
+disable_macro_jit=false
+# Determines whether to enable the GDB stub and wait for the debugger to attach before running.
+# false: Disabled (default), true: Enabled
+use_gdbstub=false
+# The port to use for the GDB server, if it is enabled.
+gdbstub_port=6543
+
+[WebService]
+# Whether or not to enable telemetry
+# 0: No, 1 (default): Yes
+enable_telemetry =
+# URL for Web API
+web_api_url = https://api.yuzu-emu.org
+# Username and token for yuzu Web Service
+# See https://profile.yuzu-emu.org/ for more info
+yuzu_username =
+yuzu_token =
+
+[Network]
+# Name of the network interface device to use with yuzu LAN play.
+# e.g. On *nix: 'enp7s0', 'wlp6s0u1u3u3', 'lo'
+# e.g. On Windows: 'Ethernet', 'Wi-Fi'
+network_interface =
+
+[AddOns]
+# Used to disable add-ons
+# List of title IDs of games that will have add-ons disabled (separated by '|'):
+title_ids =
+# For each title ID, have a key/value pair called `disabled_<title_id>` equal to the names of the add-ons to disable (sep. by '|')
+# e.x. disabled_0100000000010000 = Update|DLC <- disables Updates and DLC on Super Mario Odyssey
+)";
+} // namespace DefaultINI